Table of Contents
Advertisement
Operating the appliance
en
Do not use the measuring aid for
Note:
gel detergents and washing powder, or
for programmes with prewash, or when
the "Ready in" time has been selected.
For models without a measuring aid,
pour the liquid detergent into the
appropriate dispenser and place it in
the drum.
Start the programme
Press the Start button. The indicator
light lights up and the programme
starts.
The display panel shows the Ready in
time while the programme is running or
the programme length once the wash
cycle has started. The programme
sequence lamps inform you about the
progress of the programme.
~ Page 11
Press the @ symbol (childproof
Note:
lock) to stop the programme from being
inadvertently adjusted.
Childproof lock
To prevent the set functions of the
washing machine from being
accidentally changed, activate the
childproof lock when the programme
has started.
To activate/deactivate the childproof
lock, press and hold the Start button
for approx. five seconds. The @
symbol appears on the display panel.
@ lights up: The childproof lock is
■
active.
@ flashes: The childproof lock is
■
active and the programme selector
has been adjusted. To prevent the
programme from stopping, turn the
programme selector back to the
original programme. The symbol
lights up again.
18
The childproof lock remains
Note:
active after the program has ended and
the appliance is switched off. You must
always deactivate the childproof lock if
you want to start a new programme.
Adding laundry
After starting the programme, you can
add or remove laundry:
Press the Start button to cancel the
1.
programme.
The Start button indicator lamp
flashes and the machine checks
whether it is possible to add laundry.
Do not leave the washing
Note:
machine door open for too long
when adding laundry, as water from
the laundry may leak out.
To continue the programme, press
2.
the Start button again.
Changing the programme
If you have started the wrong
programme by mistake, you can
change it as follows:
Press the Start button to cancel the
1.
programme.
Select a different programme.
2.
Press the Start button again. The
3.
new programme starts from the
beginning.
Cancel the programme
Press the Start button to cancel the
1.
programme.
To cool the laundry: Select the Rinse
2.
programme.
Press the Start button again. The
3.
Rinse programme starts.
After the programme has ended, you
can remove the laundry.
Advertisement
Table of Contents
