Installation Of Bracket; Method To Change Shield - Echo SRM-4605 Operator's Manual

Installation of bracket

1. Bracket. 2. Angle transmission.
 Fit bracket to mounting portion of angle transmission and tightening four bolts (M5 x 25)
securely.

Method to change shield

 There are two types of shields: namely one used exclusively for nylon line and another one
used exclusively for metal blade.
 When nylon line is used, use the shield for nylon line.
1. Bolt (M5 x 22). 2. Bracket.
5. Screw (5 x 12).
 Remove bolt (M5 x 22) on the right side of the shield and slide the shield to the left and
remove it.
 Put shield of another type into groove and slide it to the right until it stops and be sure to
fasten with the removed bolt (M5 x 22).
 When using nylon line, use the shield for nylon line.
Fit cut off knife to the shield for nylon line using screw (5 x 12).
3. Four bolts (M5 x 25).
3. Shield (for nylon line).
17
4. Cut off knife.