Page 1
0410 GH SERIES Apartment Intercom System QuikStart Installation Guide ATTENTION: This is an abbreviated Installation Manual, addressing Wiring and Programming of the GH System only. The complete GH System Installation and Operation Manual is located on the CD that comes with the GH-BC Bus Control Unit.
Page 2
GH Series Installation Manual Supplement Programming Guide for Assigning Tenant Station ID Numbers Follow these instructions carefully when programming the GH entrance panel to call tenant stations. Ensure that all units are installed and wired properly. module, program the resident information (tenant names and room numbers) before assigning the ID’s. 1.
Page 3
Correcting or changing an ID setting: In order to correct a programming error, the entrance station(s) and the tenant station(s) must be cleared of their incorrect program data, then programmed again correctly. Follow these steps to clear: 1. Put the system into programming mode using the procedure described on page 1, step 3.
Aiphone warrants its products to be free from defects in material and workmanship under normal use and service for a period of one year after delivery to the ultimate user. We will repair free of charge or replace at no charge Aiphone product, that upon examination by an Aiphone Repair Technician is proven defective and under warranty.
Need help?
Do you have a question about the GH SERIES 410 and is the answer not in the manual?
Questions and answers