Table of Contents
Advertisement
Product Assembly, GT, STEP 5d - 5e
CRITICAL: Align the selector holes on the weight plates forward, toward the front of the
machine, with the half moon opening facing down. Confirm back side of weight stack
should have NO holes showing. See image above.
S
TEP 5d: Lightly Lube Guide Rods
NOTE: Lightly lubing the Guide Rods is a
great practice to do at this point due to:
●
Doing this before the weight stack
goes on and blocks the potential
"dry" part of the Guide Rods,
ensures they are lubed.
●
Ensures that the Weight Plates
internal bushing get a "break-in"
lube for a quiet & longer life
operation.
●
Add protection to the Guide Rods
(6) from future potential surface
rust in the higher humidity
environments.
S
TEP 5e: Install Stack Spacers,
Rubber Cushions, Weight Plates,
& Top Plate w/ Selector Rod
Part #
Assembly Parts List
GT-X-022
Stack Spacer, Tall, 7" for 150lb weight stack
Stack Spacer, Short, 3" for Optional 200lb
GT-X-023
weight stack
GT-X-055-ASM Top Plate - Assembly
GT-X-056
Selector Rod, 19 Holes
GT-X-059
Rubber Cushion for Weight Stack
Weight Plate, 10lbs (4.5kg) ***(19 plates
GT-X-118
with 200lb upgrade)***
QTY
2
2
1
Shown with 150 lbs
1
Weight Stack
2
14
31
100% PURE
SILICONE LUBE
+
100% COTTON
CLEANING CLOTH
Advertisement
Table of Contents
