Table of Contents
Advertisement
9150-0126-01 R-2
GEOFENCE
To operate the Integrity 150 with a Geofence, the size, shape, and location of the area is defined in its configuration. While the unit remains
in the defined area, it will transmit its location at the at rest rate. When the unit is moved outside the defined Geofence area, the unit will
transmit at the in-motion rate. The unit will continue to transmit at the in-motion rate until it returns to the defined Geofence area. Once back
in the Geofence, the unit will transmit at the at rest rate.
•
Usage Example: A rental equipment company needs to monitor assets as they leave the property until they return. The company
needs to know what is on the property twice a day. Once an asset has been rented, the company wants to know its location every
hour. This allows them to monitor how far they are travelling as well as if it is lost or stolen.
SOLAR PRODUCT PRECAUTIONS
The Integrity 150 uses a built-in solar panel to recharge its internal batteries. To maximize the recharging capability of the Integrity 150 it is
important to keep in mind the following:
• The clear plastic above the solar panel on the Integrity 150 should be kept clean and free of soil, paint, or debris to maximize battery
charging capability.
• Solar panels produce the most electricity when they are perpendicular to the sun.
• Shading and weather conditions may negatively affect the charging of the batteries from the solar panels.
• If the batteries of the Integrity 150 are depleted, it is recommended to allow the Integrity 150 to receive a full day (6+ hours) of adequate
sunlight to fully charge the batteries.
• If the clear plastic panel covering the solar panel becomes cracked, the Integrity 150 should be replaced.
BLUETOOTH INTERFACE
The Integrity 150 uses its built-in Bluetooth interface to advertise itself and for programming configuration settings as well as updating
firmware. The ST Configuration Software may be used to read and/or alter the Integrity 150's programmed configuration. The method to
perform this function is described in the ST Configuration Software section.
The Integrity 150 may also be configured to advertise its specific data, such as its UID and Firmware Version, over its Bluetooth interface.
This periodic advertisement allows a user to use a Bluetooth scanning program to read the advertisement data generated by the Integrity
150. Globalstar does not supply nor support any Bluetooth scanning programs.
For detailed protocol of the Bluetooth advertisement please refer to the 8550-0004-01 Globalstar ST150 BLE Reference Guide . This
manual may be found on the Globalstar Partner Support website https://partner.globalstar.com.
Further details of the Bluetooth Sensors can be obtained in the 8550-0008-01 Globalstar SmartOne Sensors BLE Specification. This
manual may be found on the Globalstar Partner Support website at https://partner.globalstar.com.
Integrity 150 User Manual
Confidential & Proprietary Information
6
Advertisement
Table of Contents
