Table of Contents
Advertisement
PCI Hot-Plug Manager Access
The installation instructions for hot-pluggable PCI adapters refer you to these
procedures when it is appropriate to perform them.
Note: A PCI adapter is only hot-pluggable if the PCI adapter supports hot-plug
Accessing Hot-Plug Management Functions
Note: Removing or installing a hot-pluggable PCI adapter requires the system
Use the following procedure to access the hot-plug menus.
1. Log in as root user.
2. At the command line, type smitty.
3. Select Devices.
4. Select PCI Hot Plug Manager and press Enter.
5. The PCI Hot-Plug Manager menu displays.
6.
Return to the procedure that directed you here.
7. The following section describes the menu options.
applications. See the PCI Adapter Placement Reference , order number
SA38-0538.
administrator to take the PCI adapter offline prior to performing the operation.
Before taking an adapter offline, the devices attached to the adapter must be
taken offline as well. This action prevents a service representative or user from
causing an unexpected outage for system users.
For additional information about taking an adapter offline or removing it from the
system configuration, see the AIX System Management Guide: Operating
System and Devices . This publication is available at the following Web address:
http://www-1.ibm.com/servers/aix/library/. Select Technical Publications. This
publication is also located on the AIX Documentation CD. The documentation
information is made accessible by loading the documentation CD files onto the
hard disk or by mounting the CD in the CD-ROM drive.
Chapter 3. Installing Options for the System
33
Advertisement
Table of Contents
