Download Print this page

Important Safety Instructions - Epson SC-S80650R Setup Manual

Advertisement

Introductions
EN
Read all of these instructions before using the printer. Also be sure to follow all warnings and
instructions marked on the printer.
Meaning of Symbols
The symbols on this manual and Epson product are used in order to ensure safety and proper use
of the product and to prevent danger to customers and other persons, and property damage. The
symbols indicate the meaning below.
!
Warning
Warnings must be followed to avoid serious bodily injury.
!
Caution
Cautions must be followed to avoid bodily injury.
c
Important : Important must be followed to avoid damage to this product.
Note : Notes contain useful or additional information on the operation of this product.

Important Safety Instructions

EN
This section lists precautions that must be taken to use the product safely and prevent damage to
property or injury to operators or others.
Notes on Installing
Do not obstruct the vents on the product.
If the vents are obstructed, the internal temperature could rise and cause a fire. Do not cover the
printer with a cloth or install it in a location with poor ventilation. Make sure you secure sufficient
space for the installation as described in the manual.
U "Instructions for Placing the Printer" on page 11
Use the printer in a location with sufficient ventilation.
The odors or vapors from the ink, waste ink, ink cleaner, or cleaning fluid could cause you to feel
unwell. Take the following measures if you start to feel unwell.
❏ Move to a location with fresh air.
❏ Wear a protective mask.
❏ If you have difficulty breathing or if someone's breathing stops, perform artificial respiration and
consult a physician immediately.
Do not install or store the printer in an unstable location or a location subject to vibrations from
other equipment.
The printer could fall or tip over and cause an injury.
Do not install the printer in locations subject to oily smoke and dust, or in locations subject to
humidity or where it could easily get wet.
An electric shock or fire could occur.
Do not tilt the product more than 10 degrees forward, back, left, or right while moving it.
Failure to observe this precaution could result in the printer falling over, causing accidents.
Because the product is heavy, it should not be carried by one person.
Eight people are needed to unpack or carry the printer. See the following for details on the
product's weight.
U "Instructions for Placing the Printer" on page 11
When lifting the product, make sure you lift at the locations indicated in the manual.
If you lift holding other parts, the printer may fall, catching your fingers and causing an injury. See
the following for details on lifting the product.
U "Printer Installation" on page 15
Make sure you use the correct posture when lifting the product.
Lifting using the wrong posture could cause an injury.
Before assembling the product, make sure you clear away the packaging sheets, packing
materials, and supplied items from the installation area.
If you slip or trip on these items, it could cause an injury.
!
Warning
!
Caution
5

Advertisement

loading

This manual is also suitable for:

Sc-s60600 seriesSc-s40600 seriesSc-s80600 series