Download Print this page

Epson SC-S80650R Setup Manual page 6

Advertisement

EN
Important Safety Instructions
When placing the product on a stand with casters (wheels), make sure you secure the casters
before you perform the work so that they do not move.
If the stand moves while you are performing the work, it could cause an injury.
Do not try to move the stand while the casters (wheels) and adjusters are secured.
Failure to observe this precaution could result in the printer falling over, causing accidents.
When moving the printer while it is on the stand, avoid locations with steps or uneven flooring.
Failure to observe this precaution could result in the printer falling over, causing accidents.
Notes on Handling
Do not use the printer in locations with volatile substances such as alcohol or thinner, or near
naked flames.
An electric shock or fire could occur.
Do not use the printer if it is giving off smoke or if you notice any abnormal odors or noises.
An electric shock or fire could occur. If any abnormalities occur, turn off the power and unplug the
power cable immediately, and then contact your dealer or Epson Support.
Never try to repair the printer yourself as this is extremely dangerous.
Do not use the printer in an environment where flammable gas or explosive gas may exist. Do
not use sprays that contain flammable gas inside or near the product.
A fire could occur.
Only route the cables as indicated in the manual.
A fire could occur. This could also cause damage to connected devices.
Do not insert or drop any metallic or flammable items into the openings on the printer.
An electric shock or fire could occur.
Do not touch any areas inside the printer except for those indicated in the manual.
An electric shock or burn could occur.
Do not disassemble anything except when indicated to do so in the manual.
If the LCD for the control panel is damaged, be careful of any leaking liquid crystal.
Provide first aid under any of the following conditions.
❏ If liquid adheres to your skin, immediately wipe it off and then wash the area using large
volumes of soapy water.
❏ If any liquid gets in your eyes, flush them with clean water for at least 15 minutes, and consult a
physician immediately.
❏ If liquid is swallowed, rinse your mouth out with water, swallow large quantities of water and
vomit it back up, and consult a physician immediately.
If any foreign objects or liquid such as water enters the printer, stop using it immediately.
An electric shock or fire could occur. Turn off the power and unplug the power cable immediately,
and then contact your dealer or Epson Support.
6
!
Caution
!
Warning
Do not sit on the product or place any heavy objects on the product.
Pay particular attention in houses with children. The printer could tip over or break and cause an
injury.
When transporting or storing the product, be sure that it is level: do not tilt it at an angle or
place it upside down.
Ink could leak.
Be careful not to trap your hands or fingers when opening or closing the front cover.
Failure to observe this precaution could result in injury.
When connecting cables or optional accessories, make sure they are installed in the correct
direction and that you follow the procedures exactly.
A fire or an injury could occur. Install the printer correctly by following the instructions in the
manual.
When moving the product, make sure it is turned off, the power cable is unplugged from the
outlet, and all connecting cables have been removed.
If cables are damaged, an electric shock or fire could occur.
See the manual to make sure the media and the roll core for the auto take-up reel unit are
secured correctly.
Dropping media or take-up rolls could result in injury.
Follow the instructions in the manual when removing media or take-up roll.
Dropping media or take-up rolls could result in injury.
Be sure that your hands or hair do not get caught in the media feeding unit or auto take-up reel
unit while it is operating.
Failure to observe this precaution could result in injury.
Except when moving the stand, make sure the two casters (wheels) at the front of the stand are
secured.
If they are not secured, an accident could occur.
The heaters and media edge plate may be hot; observe all necessary precautions.
Failure to observe the necessary precautions could result in burns.
Notes on the Power Supply
Make sure the blades on the plug are inserted completely into the power outlet.
An electric shock or fire could occur.
Unplug the plug regularly and clean between the blades and around the base of the blades.
If the plug is plugged in for an extended period of time, dust collects around the base of the blades
and a short circuit or fire could occur.
When unplugging the plug, grip the plug itself; do not pull the power cable.
If the cable is damaged or the plug is deformed, an electric shock or fire could occur.
!
Caution
!
Warning

Advertisement

loading

This manual is also suitable for:

Sc-s60600 seriesSc-s40600 seriesSc-s80600 series