Advertisement
FLUSH INSTALLATION INSTRUCTIONS
STEP 2 - EXHAUST DUCT ASSEMBLY INSTALLATION
1. Place the Exhaust Duct Assembly in the center of the
opening. Align the front edge of the duct with the front
of the cabinet. Align the front edge of the right side of the
duct with the front of the shelf. See Figure 3.
2. Secure the Exhaust Duct Assembly with 2 SCREWS D.
See Figure 3.
Screw D
STEP 3 - FRAME INSTALLATION
1. Place the oven adjacent to the wall or cabinet opening.
Plug the power cord into the electrical outlet.
2. Carefully guide the assembled oven into the prepared
opening. Slide the oven onto the EXHAUST DUCT
ASSEMBLY. Avoid pinching the cord between the oven
and the wall. See Figure 4.
Adjust the position of the oven so the feet of the oven are
fitted into the recesses of the EXHAUST DUCT ASSEMBLY
and the door opens properly. See Figure 5.
Screw D
Screw D
Figure 3
Screw D
Figure 4
3. DISASSEMBLY: The FRONT FRAME and BACK FRAME
come pre-assembled with ball studs engaged in the
receivers. Separate the FRONT FRAME from the BACK
FRAME. Place the assembly facedown onto a protected
surface. At the location of the ball stud, insert a flathead
screwdriver between the FRONT FRAME and the BACK
FRAME and gently pry up to disengage the ball stud from
the receiver. Repeat for each corner. See Figure 6.
5
Foot
Exhaust
duct
assembly
Duct recess
Figure 5
Figure 6
Advertisement
