Table of Contents
Advertisement
turn over.
2.1.3. REMOVAL OF CASSETTE TAPE
When the cassette tape could not be uninstalled from an electrical malfunction, There are 2
ways to remove a cassette tape.
1. Removal by compulsory unloading.
A. Press FF and EJECT button simultaneously more 3 times to set
the Service Mode to 7.
In this Service Mode 7, the LEDs are illuminated as follows.
B. Press STOP button in order to unload the mechanism. (Pay
attention of tape slack)
2. Removal by manual operation by rotating the Loading Motor with
the batteries.
A. Disconnect the AC plug, and remove the Top Panel and the
Front Panel by referring the Disassembly Procedures.
B. Connect three batteries (1.5V spec.) to the Loading Motor in
series for supplying 4.5V to rotate the Loading Motor following
Fig.
S3.
Fig. S1
Fig. S2
3
Advertisement
Table of Contents
