Table of Contents
Advertisement
1. SYSTEM: AUTO
3.3.3. ADJUSTMENT
- PG SHIFTER ADJUSTMENT
1. Press the FF and EJECT buttons simultaneously for 3 seconds.
2. Press the FF and EJECT buttons simultaneously more once to set
the Service Mode 2.
The LEDs are illuminated as follows.
3. Press the EJECT button for 3 seconds to set the PG Shifter
Adjustment Mode.
The LEDs are illuminated as follows.
4. Insert the Alignment Tape. (PAL: VFJ8125H3F)
This adjustment is automatically started.
(During the adjustment, the picture will be appeared on the
monitor.)
When this adjustment is terminated, the following operation or indication will be done.
- Adjustment completed: Cassette tape will be ejected.
Fig. E1
Fig. E2
18
Advertisement
Table of Contents
