6. SERVICING POSITION
Install the Mechanism Unit on to the MAIN C.B.A..
Then fix a screw (H), and connect two frexible card Connectors
(Cylinder connector, AC Head connector) and P1531 as shown in
Fig.
D5.
3.2. MECHANICAL ADJUSTMENT PROCEDURES
Refer to the Service Manual for R4-Mechanism Chassis.
(Order No. VRD0202010C8)
CAUTIONS:
To turn on the Adjustment Mode for Tape Interchangeability, set to
the service mode 2 as follows.
(Auto Tracking is turned off.)
1. Press the FF and EJECT buttons simultaneously for 3 seconds.
2. Press the FF and EJECT buttons simultaneously more once to set
the Service Mode 2.
Fig. D8
16