LG WSEP4723D Owner's Manual page 12

Table of Contents

Advertisement

Available languages

Available languages

en-us_main.book.book Page 12 Friday, February 10, 2023 8:31 AM
12 OPERATION
2
Press 1 to select a 12-hour clock, or 2 to select
a 24-hour clock.
3
Press START to accept the change.
Setting Convection Auto Conversion
When Conv. Bake and Conv. Roast are selected,
Convection Auto Conversion automatically
converts the standard recipe temperature entered
to a convection temperature by subtracting 25 ℉ /
14 ℃. This auto converted temperature shows on
the display. For example, select Conv. Bake, enter
350 ℉, and 325 ℉ shows on the display after
preheat.
Convection Auto Conversion is enabled by default.
To change the setting, follow these instructions.
1
Press Settings repeatedly until
in the display.
2
Press 1 to enable or 2 to disable auto
conversion.
3
Press START to accept the change.
Adjusting the Oven Temperature
Your new oven may cook differently from the one
it replaced. Use your new oven for a few weeks to
become more familiar with it before changing the
temperature settings. If after familiarizing yourself
with the new oven, you still think that it is too hot
or too cold, you can adjust the oven thermostat
yourself.
• To begin, either raise or lower the thermostat 15
℉ (8 ℃). Try the oven with the new setting. If the
oven still needs adjustment, raise or lower the
thermostat again, using the first adjustment as a
gauge. For example, if the adjustment was too
much, raise or lower the thermostat 10 ℉ (5 ℃).
If the adjustment was not enough, raise or lower
the thermostat 20 ℉ (12 ℃). Proceed in this way
until the oven is adjusted to your satisfaction.
1
Press Settings repeatedly until
in the display.
2
Use the number buttons to enter the number
of degrees you want to adjust the oven
temperature.
3
Adjust the temperature either up or down by
pressing Settings repeatedly to toggle
between plus (+) or minus (-).
4
Press START to accept the change.
NOTE
• This adjustment does not affect the broiling or
Self Clean temperatures. The adjustment is
retained in memory after a power failure. The
oven temperature can be increased (+) or
decreased (-) as much as 35 ℉ or 19 ℃.
• Once the temperature is increased or decreased,
the display shows the adjusted temperature
until it is changed.
• The thermostat adjustment for Bake will also
affect Convection Bake, Convection Roast, Roast
appears
Avto
or Crisp Convection.
Selecting the Display Language
The oven control is set to display in English but can
be changed to display in Spanish or French.
1
Press Settings repeatedly until
the display.
2
Press 1 for English, 2 for Spanish, or 3 for
French.
3
Press START to accept the change.
Turning the Preheat Alarm Light On/
Off
When the oven reaches its set-temperature, the
preheating alarm light flashes 5 times or until the
oven door is opened.
You can activate or deactivate the preheating
alarm light.
1
Press Settings repeatedly until
the display.
appears
AdJU
2
Press 1 to turn the light on and 2 to turn the
light off.
3
Press START to accept the change.
appears in
LNG
appears in
PrE

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Wsep4723fWsep4723 series

Table of Contents