ThermoWorks Saf-T-Log Quick Start Manual

BATTERY REPLACEMENT
• Replace the batteries (3 x AAA) when the battery symbol in
the display shows empty.
• After the new batteries are fitted the instrument must be
connected to a computer to configure the time and date.
• The user will be asked to select a checklist to use for the
configuration.
VIEW CURRENT USER, CHECKLIST, DATE AND TIME ON
SAF-T-LOG INSTRUMENT
• Pressing and holding the 'ON/OFF' (Backlight) button for 3
seconds at start up shows the date/time, user, checklist
and Saf-T-Log device name that is currently stored on the
Saf-T-Log instrument.
INSTRUMENT MENU
• To enter press and hold the Up () and Down () arrows
simultaneously.
• Scroll to view saved readings, change checklist, change
user, instrument info including: date/time, firmware version,
instrument name, checklist name, calibration info, TRIM
value and change the Auto-off.
• Press REC button to exit.
CHANGING SAF-T-LOG TEMPERATURE UNITS (°F/°C)
The Saf-T-Log device will display temperature (°F/°C) in the
scale that was chosen in the Checklist setup 'Format Reports'
tab. Note 2: When using multiple checklists on the Saf-T-Log
device, the temperature scale will be selected by the first
checklist when downloaded and remain as the default scale for
all subsequent checklists.
Ph: 801-756-7705 Fax: 801-756-8948
P-12-012-02-e
www.thermoworks.com
Made in the UK
ThermoWorks, Inc.
Utah, U.S.A.
Ref: 547-280 / 15.10.21
Saf-T-Log
Paperless HACCP
Thermometer
Quick Start Guide