Table of Contents
Advertisement
5-2. FOCUS OPERATION
5-2-1. Manual Focus Operation
Far
Focus Ring
5-2-2. Servo Focus Operation
5-3. IRIS OPERATION
The iris operation mode can be switched between auto and manual with the iris operation mode change-over
switch.
5-3-1. Automatic Iris Operation
Iris Operation Mode
Change-over Switch
Focus Operation
Change-over Knob
Near
Focus Operation
Change-over Knob
1
When the manual focus operation is performed, set the
focus operation change-over knob to MANU. position.
NOTE
The lens may be damaged if the focus ring is turned
forcibly with the knob at the SERVO position.
2
Turn the focus ring to bring the near or far object into
focus.
1
When the servo focus operation is performed, set the
focus operation change-over knob to SERVO position.
2
Mount the accessory such as focus demand. For the details,
refer to the operation manual of accessories.
Slide the iris operation mode change-over switch to the "A"
position.
The iris operation is performed automatically by the instruction
from the camera, to keep the video signal level constant.
NOTE
The automatic iris operation may not be performed depending
on the types of cameras.
E15
5 OPERATION
Advertisement
Table of Contents
