Table of Contents
Advertisement
5 OPERATION
5 OPERATION
5-1. ZOOM OPERATION
5-1-1. Manual Zoom Operation
Toward Widest end
Toward
Telephoto end
Zoom Lever
Zoom Ring
5-1-2. Servo Zoom Operation
Zoom operation can be performed by driving the built-in motor in the lens.
5-1-3. Maximum Zoom Speed Adjustment
The maximum speed of zoom when the zoom rocker seesaw is pressed can be adjusted with the max.
zoom speed adjusting volume.
The adjustment and the setting can also be made on the information display. Refer to
"Information displa
Zoom Operation
Change-over Knob
Zoom Rocker Seesaw
Max. Zoom
Speed Adjusting
Volume
y" .
1
Set the zoom operation change-over knob at the bottom of
the lens drive unit to MANU. position.
2
Turn the zoom ring (or zoom lever) to perform zoom operation.
NOTE
The zoom operation change-over knob must be set to the
MANU. position before performing manual zoom operations.
The lens may be damaged if manual zoom operations are
forcibly performed with the knob at the SERVO position.
1
Set the zoom operation change-over knob to SERVO position.
2
Press the zoom rocker seesaw to perform zoom operation.
Zoom speed changes by the depth of the switch being pressed.
The deeper the switch is pressed the faster the zoom speed
becomes.
E10
Operation Manual
Advertisement
Table of Contents
