Setting The Focus Mode - Canon RF 24mm F1.8 MACRO IS STM Instructions Manual

2. Setting the Focus Mode

Focus mode switch
Focusing ring
To shoot in autofocus (AF) mode, set the focus
mode switch to AF.
To use only manual focusing (MF), set the focus
mode switch to MF, and focus by turning the
focusing ring.
Quickly turning the focusing ring may result in
z
delayed focus.
Due to the structural characteristics, the focus
z
lens driving speed may vary according to the
variation in the air temperature and posture.
Do not touch the operating part in the front of
z
the lens while the focus lens is operating. If
external pressure is applied to the moving part,
the lens initialization may be performed to return
the focus lens to the correct position for control
purposes.
The lens' focusing ring is electronic.
z
With a camera capable of electronic full-time
z
manual focus, manual focusing is possible
in both One-Shot AF and Servo AF modes.
However, this requires a change in camera
settings.
When AF operation is set to One-Shot AF,
z
manual focus is possible after autofocusing
has been completed by continuing to press the
shutter button halfway (electronic manual focus
function). However, this requires a change in
camera settings.
Please refer to the camera's instructions for details.
ENG-7