Zenoah HT220-75 Operator's Manual page 8

● Wear sturdy, non-slip boots.
● Always wear thick long pants, boots, gloves, and a
long-sleeved shirt. Do not wear loose clothing, scarves,
jewelry, etc. that can catch twigs, branches, and leaves.
Bind and keep your hair above your shoulders.
● If there is a risk of dust, wear a dust mask.
● Be sure to prepare first aid equipment nearby.
Safety systems
WARNING: Please read the warning
instructions described below before working
with the hedge trimmer.
This section describes the safety functions and their
purposes of the hedge trimmer, as well as inspection
and maintenance procedures to ensure the proper
operation. For the location of the parts of this machine,
Product overview - HT220-75 on page 3
refer to
Product overview - CHT220-60 on page 4
If the machine is not properly maintained or is not
serviced or repaired by a professional engineer, the
machine life will be shortened and the risk of accidents
will increase. For more information, contact your local
dealer.
8
Inspection of safety lock lever CHT220-60
1. Confirm that safety lock lever (A) and throttle trigger
(B) move smoothly and that the return spring
functions properly.
2. Push down the safety lock lever. Make sure that it
returns to its original position when released.
and
.
WARNING: Never use the machine with a
defective safety device. Inspect and
maintain the safety devices of the machine
according to the description in this section. If
your product does not meet any of these
requirements, contact your local dealer for
repair.
CAUTION: Special training is required for all
services and repairs on this machine,
especially the safety equipment. If any
problems are found in the machine based on
the inspections in this operator's manual,
contact your local dealer. When you buy one
of our products, you are guaranteed
professional repair and services.
1045 - 001 - 01.06.2020