Safety - Zenoah HT220-75 Operator's Manual

Symbols on the product
WARNING! This product can be
dangerous. Injury or death can occur to
the operator or bystanders if the product is
not used carefully and correctly. To
prevent injury to the operator or
bystanders, read and follow all safety
instructions in the operator's manual.
Read the operator's manual carefully and
make sure that you understand the
instructions before use.
Always wear the following:
● Earplugs (earmuffs)
● Protective glasses (goggles)
● If there is a risk of dust, wear a dust
mask.
● Wear a protective helmet where objects
can fall overhead.
WARNING! There is a risk of cutting
fingers or hands due to the sliding blades.
Keep your hands away from the blades.
Handle adjustment lock: CHT220-60
You can change the angle of the rear
handle to make it easier to work.
Wear approved protective gloves.
Safety definitions
Warnings, cautions and notes are used to point out
specially important parts of the manual.
WARNING: Failure to follow the instructions
described in this manual may cause a risk of
injury or death of workers or injury to people
nearby.
1045 - 001 - 01.06.2020
This symbol indicates that the type of fuel
is mixed gasoline.
This symbol indicates that pressing the
primary pump fills the carburetor with fuel.
Choke lever: open position
Choke lever: closed position
The serial number is indicated on the ID
yyyywwxxxxx
plate.
yyyy is the year of production, ww is the
week of production, and xxxxx is the serial
number.
Product liability
Under the Product Liability Law, we are not liable for
damage arising from this product in the following cases:
● The product was repaired incorrectly.
● The product was repaired using parts not
manufactured by the Manufacturer or parts not
approved by the Manufacturer.
● The product used accessories not supplied by the
Manufacturer or accessories not approved by the
Manufacturer.
● The product was not repaired by an authorized
Service Center or an authorized Agency.

Safety

CAUTION: Failure to follow the instructions
described in the manual may cause a risk of
damage to the products, attachments, other
items, or adjacent areas.
Note: Indicates to provide the details needed in certain
situations.
5