Advertisement
Display
Step 7
1.
Unscrew the bolts on
3.
Connect the display
the mounting brackets
cables (marked green
of the display.
and blue) as shown
below.
2.
Mount the display panel
onto the handlebar and
adjust it to an angle you
can view easily on the
seat in a riding position.
Tighten the bolts with
the M3 hex key.
M3
12
Bike Assembly
4.
Wrap the display wires
together with the
connected front light
cable with the cable
binder.
Blue
Green
Bell and Front/Rear Reflector
Step 8
Bike Assembly
1.
Unscrew the bolt on the
2.
Unscrew the bolt on
bell mount and install
the reflector mount
the bell. Adjust the
and install the reflector.
angle before tightening
Adjust the angle before
the bolt.
tightening the bolt.
NOTE
You can position the bell and reflector according to your preference.
!
3.
Attach the rear
reflector to the seat
post. Adjust the angle
before tightening the
bolt.
90°
Ground
13
Advertisement
