Advertisement
Front Wheel
Step 3
1.
Take out the brake pad
2.
Loosen the front hub
spacer from the front
caps and gently slot
brake caliper.
the wheel into the
fork. Ensure the disc is
aligned with the brake
caliper pads.
NOTE
1. Torque can be measured by using a torque wrench.
!
2. Be careful not to accidentally squeeze the brake levers before this step.
Otherwise you may cause misalignment on your hydraulic brakes.
08
Bike Assembly
3.
Tighten and secure the
front hub cap with the
socket wrench (Torque
30–35 Nm).
Bike Assembly
1.
Unscrew the bolts that
2.
Attach the support
affix the front fender to
rods to the fork legs
the fork top.
with the M4 hex key.
Front Fender
Step 4
3.
Adjust the fender to
your own preference.
Ensure the wheel is
centered and the gap
between the fender
and the wheel is clear.
Fasten the bolts.
09
Advertisement
