Advertisement
Charging
Step 11
1.
The battery can be charged either in or out of the bike. Power off the bike before
charging the battery in the bike.
2.
Make sure the battery is placed on a flat and clear surface. Plug the DC power cord
(barrel connector) into the port.
3.
Plug the adapter into the wall. The LED indicator will turn red.
4.
The indicator will turn green when the battery is fully charged. Unplug the adapter first
before pulling out the cord from the battery.
WARNING
1. Charge the battery in an environment from 50–86°F (10–30°C).
!
2. The battery won't charge when it is over 113°F (45°C) or below 32°F (0°C). Let the battery
adjust to room temperature for at least 1 hour before trying again.
Blue Light
Green Light
80 - 100% power
50 - 80% power
16
Bike Assembly
Red Light
Flashing Red Light
5 - 50% power
<5% power
Bike Assembly
1.
Peel the protective film
2.
Hold the on/off button
off the display screen.
to power on/off the
bike.
On/Off Button
Speed
Battery
Mileage
Level
Throttle
Assist
USB
Level
Charing
Port
Start Your Bike
Step 12
3.
Our system provides
different levels of pedal
assistance (1 = lowest,
5 = highest) so you can
adapt the power output
depending on your
riding needs. Level 0
means no pedal assist.
Assist level 1
Eco Mode: Minimal power
output for maximum battery
efficiency.
Assist level 2
Tour Mode: Low power output
for riding long distances.
Assist level 3
Normal Mode: Medium power
output for city commuting.
Assist level 4
Sport Mode: Strong power
output for active riding.
Assist level 5
Turbo Mode: Maximum power
output for extreme riding.
17
Advertisement
