Quick Start Guide - Murray M26-T Instruction Manual

QUICKSTART

Quick Start Guide

Check the machine for the following each time before use:
• That there are no leaks in the fuel system
• That the cutting unit and all safety devices are in perfect condition
• That all screws are securely fastened
Fuel and Oil
Recommended fuels
• Use only a mixture of normal unleaded petrol and 2-stroke engine oil. Mix the fuel mixture
as indicated on the fuel mixing table.
• Start the machine at least 3 m away from the refuelling site to avoid the possible risk of
fire.
• Do not smoke whilst refuelling or working with the machine.
• Do not use the trimmer near inflammable liquids or gases. This could result in an
explosion and/or fire
• Pour the correct quantities of petrol and 2-stroke oil into a container. Then shake the
container well.
Fuel mixture table
5 litre
Mixing procedure: 25 parts petrol to 1 part oil
4
Check the position & operation of controls to ensure you are
comfortable before you start using the machine. Triggers, starter
cord and grip position should provide smooth operation, balance
and comfort before starting the machine. Check that all screws are
securely fastened and also check all the safety devices.
Always use the shoulder strap when using the appliance. Switch off
the engine before you take off the shoulder strap.
Do not use a fuel mixture which has been kept for longer than 90
days, it may damage the unit.
Only use containers designed and approved for the purpose to
transport and store fuel.
Petrol (unleaded)
USE Clean fresh "Regular Unleaded Fuel"
Fuel with up to 10% ethanol can be used - 25:1 Fuel/Oil Ratio
2-stroke oil
200 ml (2-Stroke Oil)