Upgrading The Firmware - Gateway WGR-250 User Manual

3
Click the
Yes
the page. The access point/router settings are returned to the defaults.
Caution
4
To exit the Gateway Wireless Router Setup utility, close your browser or enter another
address in the browser's address field and press E

Upgrading the firmware

New firmware for your access point/router is made available periodically by Gateway.
Firmware upgrades may provide enhanced features, increased compatibility, or an updated
interface.
Check your firmware version and date (found on the Setup page) against the latest version
on the Gateway Web site (www.gateway.com). If a new version is available, follow these
instructions to download and install the update.
To upgrade the firmware:
1
Download the new firmware version (a .TRX file) from the Gateway Web site and note
where the file is saved on your computer.
2
Open your Web browser and go to the Gateway Wireless Router Setup utility. For more
information, see
3
Click
Router
check box to select
Any settings you have made and saved will be lost when
the default settings are restored.
"Contacting the access point/router" on page
on the left side of the window. The Router page opens.
www.gateway.com
Using access point/router settings and features
, then click
Router Defaults
.
NTER
at the bottom of
Apply
14.
61