Back - Gateway WGR-250 User Manual

Back

Connector/component
Antenna
Reset switch
LAN ports
WAN port
Power connection
Antenna
LAN Ports WAN Port
Description
Sends and receives signals from wireless Ethernet computers and
devices.
Press and hold the reset switch for 10 seconds to return all
configuration settings to the default.
Connect a computer, hub, or switch to these RJ-45 Ethernet ports.
Connect the DSL or cable modem to this RJ-45 Ethernet port.
-OR-
If you are adding this access point/router to an existing network that
has a router, connect the LAN port from the existing router to this
RJ-45 Ethernet port.
Plug the AC adapter into this connection. Use only the AC adapter
that came with the wireless access point/router. Use of any other
AC adapter may damage your access point/router and void the
warranty.
www.gateway.com
Antenna
Reset switch
Power connection
Back
5