Preparation - Gateway WGR-250 User Manual

Chapter 2: Setup for Typical Users

Preparation

If you intend to use the access point/router to connect your network to the Internet, you
need a broadband Internet connection (DSL or cable). You also need the following
information and equipment:
■ A host computer (initially connected to the broadband modem or to a pre-existing
router) that has a network interface card
■ An RJ-45 Ethernet cable (Cat-5 or better)
■
A DSL or cable modem (purchased or provided by your ISP)
■ Host computer's IP address (assigned by your ISP, if a static IP address is required)
■ Subnet mask (assigned by your ISP, if a static IP address is required)
■
Default gateway (assigned by your ISP, if a static IP address is required)
■
Primary DNS IP address (assigned by your ISP, if a static address is used)
■ Host computer's name and workgroup (available through the Windows Control Panel
under System information)
8
www.gateway.com