Where To Go From Here - Gateway WGR-250 User Manual

When you are finished making entries in the above fields, click
entries and exit, or click
close the window if you did not make any changes.
9
When you are finished making entries on the Setup page, click
entries. Click
10
To exit the access point/router setup utility, either close your browser or enter a
different IP address in the address field and press E

Where to go from here

Now that you have your access point/router configured, it is time to configure your
computers to use it. Go to
In addition to the above mentioned chapter, you may be interested in modifying additional
access point/router settings. If so, you should read
and Status" on page 59
to exit without saving any changes. Click
Cancel
to revert to the previous settings.
Cancel
"Setting Up Windows Ethernet Networking" on page
and "Advanced Configuration and Settings" on page
www.gateway.com
Where to go from here
Apply
Apply
.
NTER
"Routine Access Point/Router Settings
to save your
to
Close
to save your
25.
67.
23