Advertisement
KH3461_UK
07.03.2006
Warning!
Never use the appliance for any
other purposes other than those
listed here. There is a major possi-
bility of accidents if you mistakenly
happen to turn off the safety device
of the appliance!
To avoid the risk of accidents and
injuries:
• Never put your hand into the ope-
nings of the appliance. Do not insert
any objects through the openings
– except for the appropriate stodger
and the foodstuff to be processed.
Otherwise, there are chances of a
serious risk of accidents!
• Unplug the appliance, before atta-
ching or removing the accessories.
• Do not leave the appliance unsuper-
vised, when it is ready for use. Always
unplug the appliance after use or
during breaks in order to avoid it
from being turned on accidentally.
• Only use original accessories, which
are meant for this appliance. Other
parts may probably not meet the
safety requirements.
• Do not allow children and elderly pe-
ople to handle the appliance without
supervision, since they may not always
be able to assess potential hazards.
15:44 Uhr
Seite 5
- 5 -
5. Assembly
Attention: All accessories are coated
with a thin oil film to protect them
from corrosion. Therefore clean all
the parts carefully before using the
appliance for the first time, in accor-
dance with the detailed instructions
found under "8 Cleaning".
a) Assembling the meat grinder
Unfold the fold-out diagramme. There
you will find the step-by-step illustra-
tions for assembling the appliance.
• Place the transport screw
mincer casing
.
Ensure that the metal washer as well
as the insulation ring remain attached
to the axle. Without the washer, the
screw would wear out too fast.
• Place the cross blade
sharp side is facing the cutting disc
Warning: The blade is very sharp!
Attention: The appliance will be
damaged if the cross blade is inser-
ted the wrong way around!
• Choose the appropriate cutting disc
– You will find a selection of discs in
the small compartment on the top of
the appliance (Fig. D). Push the cover
upwards to open it and take out the
required disc.
• Insert both lugs of the chosen disc
into the grooves in the mincer hou-
sing
.
bifinett KH 3461
in the
so that the
.
Advertisement
