Cam Menu - UTC Fire and Security interlogix TVM-1700 User Manual

4. OSD V-Position
Adjust the OSD position of the Display vertically
(up or down).
5. OSD Timeout
Adjust the display of the OSD menu (5 to 60
seconds).
6. OSD Transparency
Adjust the OSD. Transparency
7. Information
Shows the status of the current Display
settings.
8. Memory Recall
Reset the screen to the factory preset display
settings.

CAM menu

 Picture
1. Contrast
Adjust the contrast of image, the difference
between light and dark areas on the screen.
2. Brightness
Adjust the brightness of the image.
3. Tint
Adjust the Tint of image.
4. Color
Adjust Color of image.
5. Sharpness
Adjust the display image quality (if the screen
proceed to scaling up).
6. Color Tone
Choose different preset color temperatures or
set your own customized color parameters
(Normal/Warm/Cool).
7. Picture Mode
Select the picture mode
(Standard/Movie/Dynamic/User).
User Manual
8. Screen Format
(Full/Zoom1/Zoom2/Subtitle/4:3/panorama)
 Sound
1. Bass
When you select the user mode, adjust the
bass sound.
2. Treble
When you select the user mode, adjust the
treble sound.
3. Balance
Adjust the sound balance of the left and right
speakers.
4. MTS
Not used.
5. Sound Mode
Choose different preset sound mode or your
own customized sound
(Standard/Movie/Music/User).
 Function
1. 3D NR
Reduce the noise in the picture due to poor
reception or poor picture quality (Off/ Low/
Middle/ High).
7 EN