Changing A Monitor Parameter; Hot Keys; Adjustment Procedure; Osd Function - UTC Fire and Security interlogix TVM-1700 User Manual

Secondary Function: Allows for vertical scrolling
in the OSD menu, and to INCREASE the value
of the selected menu function.
8 Button ( * )
Allows for Vertical scrolling in the OSD Menu,
and to DECREASE the value of the selected
submenu function.

Changing a monitor parameter

1. Press the MENU button on the front panel to
obtain the OSD menu screen.
2. Use Left-Right buttons to select the menu.
3. Use Down button to select the submenus.
4. Use Up-Down buttons to select a submenu
function.
5. Press SOURCE button, then using left-right
buttons you can make adjustments as
necessary
6. To exit, press MENU.

Hot keys

Selects signal in order. VGA
- HDMI - CAM
When there is no OSD, if
you press this ▲ (UP/AUTO)
button, you can use the best
display performance fit for a
current mode
When there is no OSD, you
can adjust the volume
directly
User Manual

Adjustment procedure

OSD function

Configure the monitor using the onscreen display
(OSD) menus and submenus. Changes are
immediately saved and implemented.

VGA menu (HDMI)

 Picture
1. Contrast
Adjust the contrast of image, the difference
between light and dark areas on the screen.
2. Brightness
Adjust the brightness of the image.
5 EN