Satco NUVO LIGHTING 65-079 Installation And Service Instructions

Led vapor proof ceiling mount

INSTALLATION AND SERVICE INSTRUCTIONS

Model 65-079

LED Vapor Proof Ceiling Mount

SAFETY PRECAUTION:

WARNING: risk of fire and electrical shock! Before beginning installation or service, disconnect the power by turning off the circuit breaker.

Turning the power off by using the light switch is not sufficient to prevent electrical shock. This floodlight is for outdoor use and should not be

used in areas of limited ventilation or high ambient temperature. All work should be performed by a qualified electrician.

IMPORTANT: This product must be installed in accordance with the applicable installation code by a person familiar with the construction and

operation of the product and the hazards involved.

1. Install the desired mounting fitting -- recessed box adapter, surface box, pendant, or wall adapter.

2. Install the mounting screws (supplied).

3. Slip the mounting gasket over the power leads and line up the mounting key slots. Ensure that the ground screw opening

lines up with the grounding pads.

4. Connect the supply leads to the fixture leads – black to black (hot), white to white (neutral), and green to green (ground).

Connect the supply ground wire to the grounding pads with the screw supplied.

5. Twist the socket adapter up over the mounting screws. Tighten the mounting screws.

6. Install the globe.

7. Slip the guard (optional) up and over the globe, lining up the keyways in guard with the guard lugs on the socket adapter.

8. Turn clockwise until tight. Install the set screws and tighten.

TROUBLE SHOOTING CHECKLIST: If the light does not work.

1. Check your power source.

2. Check electrical connections.

Satco Products, Inc.,

Brentwood, NY 11717

Table of Contents

Do you have a question about the NUVO LIGHTING 65-079 and is the answer not in the manual?

Page 1 8. Turn clockwise until tight. Install the set screws and tighten. TROUBLE SHOOTING CHECKLIST: If the light does not work. 1. Check your power source. 2. Check electrical connections. Satco Products, Inc., ©Copyright 2015 Satco Products, Inc. 10/15 Brentwood, NY 11717...
Page 2 INSTRUCCIONES PARA INSTALACIÓN Y SERVICIO Modelo 65-079 Montaje en techo de LED a prueba de vapor PRECAUCIÓN DE SEGURIDAD: Advertencia: ¡Riesgo de incendio y descarga eléctrica! Antes de comenzar con la instalación o el servicio, desconecte la energía eléctrica apagando el disyuntor. Desconectar la energía con el interruptor de la luz no es suficiente para prevenir una descarga eléctrica. Este foco reflector es para uso en exteriores y no debe utilizarse en áreas con ventilación limitada o de alta temperatura ambiente.