Satco NUVO STARFISH Quick Start Manual

STARFISH WIFI SMART 6' INDOOR STRIP,
OPTIONAL 3' EXTENSION
Model: S11263, S11264
INSTALLATION AND SAFETY INSTRUCTIONS
IMPORTANT: Read before installing fixture. Retain for future reference.
WARNING: Risk of Fire or Electric Shock
• This strip lighting is only intended to be used with the products provided in the kit,
or the S11264 extension strips.
• This product consumes a total of 20W (.167A) and is rated to control up to 8
additional S11264 extension strips. Each extension strip consumes 8.8W (.075A).
• Installation requires knowledge of luminaries electrical systems. If not qualified, do
not attempt installation. Contact a qualified electrician.
• To reduce risk of fire and over-heating, secure all connections.
• TURN OFF the electrical power before proceeding.
• The electrical rating of this product is 120V/60Hz.
• The grounding and banding of the overall system shall be done in accordance with
National Electric Code (NEC) Article 600 and local codes.
• To prevent wiring damage or abrasion, do not expose wiring to edges of sheet
metal or other sharp objects.
• Do not make or alter any open holes in an enclosure of wiring or electrical
components during kit installation.
• This device is not intended for use with emergency exits.
NOTE: This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful interference; (2)
This device must accept any interference received, including interference that may
cause undesired operation. Visit www.Satco.com for
full warranty details and dimmer compatibility information.
© Copyright 2020 Satco Products, Inc. 10/20
Satco Products, Inc.
Brentwood, NY 11717