Table of Contents
Advertisement
Installation
Scope
This document describes the installation of the UC240 UltraSync Communicator
for Carrier 2X-A/2X, KFP-A, and ZP2-A/ZP2 fire alarm control panels.
Although the UC240 supports multiple interfaces to fire alarm panels, this
document will focus on the hardware interface only – the dial capture and serial
interfaces are not discussed and their use is not recommended at this time.
As the UC240 is not sold in the United Kingdom, information in this document is
not applicable for UK customers.
Note:
For all other information on the UC240 UltraSync Communicator, including
interface connections, programming, and technical specifications – refer to the
UC140/UC240 UltraSync Communicator Installation Sheet (P/N 466-5558-EN
REV A or later).
Description
The UC240 UltraSync Communicator is a dual path (IP and SIM 4G/2G mobile
technology) alarm signalling unit for transmitting signals from a customer's fire
alarm control panel to a central monitoring station via the Carrier UltraSync
secure transmission system.
Once registered with the Carrier UltraSync portal, the UC240 allows notifications
to be sent to:
•
Central Monitoring Stations (CMS)
•
Email addresses
•
Supported mobile apps (IOS and Android)
Figure 1: UC240 Communicator
UC240 UltraSync Communicator Installation Guide for 2X-A/2X, KFP-A, and ZP2-A/ZP2 Fire Alarm Control Panels
1
Advertisement
Table of Contents
