I-Tech MAG700 User Manual page 13

Warning:
•
position the applicator in such a way that the green side is in contact
with the patient;
•
the user must periodically check the insulation (integrity) of the
applicators and their cables and check that they are not damaged (if
necessary, contacting the manufacturer);
•
the use of the connection cables of the belt and the feeder: danger of
strangulation. Be extremely careful if it is necessary to pass the cables
near the neck and the patient's head: In this case it is necessary to
maintain a safe position and to avoid abrupt movements that can
cause the cables to twist.
•
to avoid exposing the device and its accessories to excessive direct
light and dust. See the paragraph Care of the device.
The manufacturer shall be deemed to be responsible for the performance,
reliability and safety of the appliance only if:
•
any additions, modifications and/or repairs are carried out by
authorized personnel directly by the manufacturer. Any
modification, addition and/or repair performed by unauthorized
personnel may result in the loss of safety of the device or its
malfunction;
•
the electrical system of the environment in which MAG700 is
inserted complies with national laws;
•
the appliance is used in strict accordance with the operating
instructions contained in this manual.
ATTENTION
at the end of each therapy session.
The materials used to produce the device have exceeded the
prescribed standards for the toxicity of the materials themselves. In
case of allergic reactions, discontinue therapy and consult a physician.
In case you need to use the extended treatment device (even up to 8
hours) it is advisable to use an intensity not exceeding 50G for all
programs. In this case the efficacy of the treatment is given by the
prolonged time of therapy rather than the maximum field intensity
settable.
Applied parts. It's necessary to consider as applied parts not only all
accessories (belt with 2 solenoids) but also the device and the power supply
that can get in contact with the user during the treatment.
IACER Srl
Disconnect the power supply from the main socket
!
13 MNPG69-09