Peripheral Setup - Boser HS-4705 Manual

4.9

Peripheral Setup

The IDE hard drive controllers can support up to four separate hard
drives. These drives have a master/slave relationship that is
determined by the cabling configuration used to attach them to the
controller. Your system supports two IDE controllers--a primary and a
secondary--so you can install up to four separate hard disks.
Phoenix – AwardBIOS CMOS Setup Utility
OnChip IDE Device
Onboard Device
SuperI/O Device
Watch Dog Timer Select
Move Enter: Select + / - /PU/PD: Value F10: Save ESC: Quit F1: General Help
F5: Previous Values F6: Fail-Safe Defaults
On-Chip Primary PCI IDE
IDE Primary Master PIO
IDE Primary Slave PIO
IDE Primary Master UDMA
IDE Primary Slave UDMA
On-Chip Secondary PCI IDE
IDE Secondary Master PIO
IDE Secondary Slave PIO
IDE Secondary Master UDMA
IDE Secondary Slave UDMA
IDE HDD Block Mode
Move Enter: Select + / - /PU/PD: Value F10: Save ESC: Quit F1: General Help
F5: Previous Values F6: Fail-Safe Defaults
USB Controller
USB 2.0 Controller
USB Keyboard Support
USB Mouse Support
AC97 Audio
Init Display First
Onboard LAN Chip
Move Enter: Select + / - /PU/PD: Value F10: Save ESC: Quit F1: General Help
F5: Previous Values F6: Fail-Safe Defaults
Integrated Peripherals
Press Enter
Press Enter
Press Enter
Disabled
F7: Optimized Defaults
OnChip IDE Device
Enabled
Auto
Auto
Auto
Auto
Enabled
Auto
Auto
Auto
Auto
Enabled
F7: Optimized Defaults
Onboard Device
Enabled
Enabled
Disabled
Disabled
Auto
Onboard/AGP.
Enabled
F7: Optimized Defaults
Item Help
Menu Level
Item Help
Menu Level
Item Help
Menu Level
29