Related Manuals for Boser HS-1743
Summary of Contents for Boser HS-1743
- Page 1 HS-1743 Intel® Core™ 2 Duo/Core™ Duo/ Core™ Solo/Celeron® M processor Mini ITX Board •CompactFlash•Mini PCI•PCIe x1•PCI• •GPIO•DVI-I/CRT/LVDS•Dual GB LAN• •Audio•SATA•RS-232/422/485•8 COM• •8 USB2.0•WDT•H/W Monitor•...
- Page 2 Unauthorized reproduction, transmission, translation, and storage of any form and means (i.e., electronic, mechanical, photocopying, recording) of this document, in whole or partly, is prohibited, unless granted permission by BOSER Technology Co., Ltd. reserves the right to change or improve the contents of BOSER Technology Co., Ltd.
-
Page 3: Table Of Contents
Table of Contents Chapter 1 General Description ........1 1.1 Major Features ............... 2 1.2 Specifications ................ 2 1.3 Board Dimensions..............4 Chapter 2 Unpacking ..........5 2.1 Opening the Delivery Package..........5 2.2 Inspection................5 Chapter 3 Hardware Installation ......7 3.1 Before Installation ..............7 3.2 Board Layout ................. - Page 4 Chapter 4 AMI BIOS Setup ........27 4.1 Starting Setup..............27 4.2 Using Setup ................. 28 4.3 Main Menu................29 4.4 Advanced Settings .............. 30 4.5 Advanced PCI/PnP Settings..........35 4.6 Boot Settings ............... 36 4.7 Security Settings ..............36 4.8 Advanced Chipset Settings..........
- Page 5 Declaration of Conformity -- CE Mark BOSER Technology hereby acknowledges that compliance testing in accordance with applicable standards of the EU’s EMC Directive, 89/336/EEC, was successfully completed on a sample of the equipment identified below: Equipment Class: Information Technology Equipment...
-
Page 6: Safety Instructions
Safety Instructions Integrated circuits on computer boards are sensitive to static electricity. To avoid damaging chips from electrostatic discharge, observe the following precautions: Do not remove boards or integrated circuits from their anti-static packaging until you are ready to install them. Before handling a board or integrated circuit, touch an unpainted portion of the system unit chassis for a few seconds. -
Page 7: Chapter 1 General Description
Chapter 1 General Description The HS-1743 is an Intel® 945GME GMCH chipset-based board designed. The HS-1743 is an ideal all-in-one mini ITX board. Additional features include an enhanced I/O with CF, DVI-I/CRT/LVDS, dual GB LAN, audio, SATA, COM, and USB2.0 interfaces. -
Page 8: Major Features
10/100/1000 Based Ethernet uses. To secure the reliability in the unmanned or standalone system, the function of WDT (Watchdog Timer) in HS-1743 can be combined with the software which does not need arithmetical functions of a real-time clock chip. The WDT function can automatically reboot the system once programs crash in the system. - Page 9 Monitoring temperatures, voltages, and cooling fan status Expansion Interface: 1 x Type III mini PCI socket 1 x PCIe x1 socket (solder side) 1 x Non-standard PCI socket (solder side) for BOSER Riser Card Power Function: Supports AT/ATX power mode Operating Temperature:...
-
Page 10: Board Dimensions
Resolution: 2048 x 1536 DVI Chipset: Chrontel 7307 Audio Chipset: RealTek ALC202A Audio Interface (w/audio jack): MIC In, Line Out Amplifier: Provides 2W stereo power amplifier Ethernet Chipset: Dual RTL8111C 10/100/1000 Mbps LAN Ethernet Interface: 2 x RS-45 Board Dimensions... -
Page 11: Chapter 2 Unpacking
Chapter 2 Unpacking Opening the Delivery Package The HS-1743 is packed in an anti-static bag. The board has components that are easily damaged by static electricity. Do not remove the anti-static wrapping until proper precautions have been taken. Safety Instructions in front of this manual describe anti-static precautions and procedures. - Page 12 Cables Package Description QTY. Print DB25-26P(2.0) flat cable 27cm SATA cable 50cm (w/Lock) COM DB9*4-40P(2.0) flat cable 22cm SATA power cable 15cm It is recommended that you keep all the parts of the delivery package intact and store them in a safe/dry place for any unforeseen event requiring the return shipment of the product.
-
Page 13: Chapter 3 Hardware Installation
Chapter 3 Hardware Installation This chapter provides the information on how to install the hardware using the HS-1743. This chapter also contains information related to jumper settings of switch, and watchdog timer selection etc. Before Installation After confirming your package contents, you are now ready to install your hardware. -
Page 14: Board Layout
Board Layout Top Side... -
Page 15: Jumper List
Solder Side Jumper List Jumper Default Setting Setting Page CF Use Master/Slave Select: Master Short 1-2 JP2/JP7 AT/ATX Power Mode Select: ATX Open Panel Voltage Select: +3.3V Short 2-3 FSB Frequency Select: 667MHz Open Inverter Voltage Select: +5V Short 2-3 LAN1 Enabled/Disabled Select: Enabled Open Clear CMOS: Normal Operation... -
Page 16: Connector List
PCI1 PCI Socket FN1/FN2 Fan Power Connector 20-pin ATX Power Connector Configuring the CPU The HS-1743 provides with Socket M for Intel® Core™ 2 Duo/ Core™ Duo/Core™ Solo/Celeron® M 400 series processor. JP4: FSB Frequency Select Options Settings 533MHz FSB... -
Page 17: Vga Controller
VGA Controller The HS-1743 provides three types of connection for video output. CN3 offers a CRT/DVI-I connector and CN10/CN13 are the LVDS interface connectors onboard reserved for flat panel installation. CN3A: 15-pin CRT Connector PIN Description PIN Description Green Blue... - Page 18 The HS-1743 has an onboard jumper that selects the working voltage of the flat panel connected to the system. Jumper JP3 offers two voltage settings for the user. JP3: Panel Voltage Select Options Settings Short 1-2 +3.3V (default) Short 2-3...
-
Page 19: Serial Ata Connector
CN22/CN23: Serial ATA Connector Description SATATXP SATATXN SATARXN SATARXP Parallel Connector CN15 is a standard 26-pin flat cable connector designed to accommodate parallel port connection on the HS-1743. CN15: Parallel Port Description Description Strobe Auto Form Feed DATA 0 ERROR#... -
Page 20: Serial Port Connectors
3.10 Serial Port Connectors The HS-1743 offers 16C550 compatible UARTs with Send/ Receive 16-byte FIFO serial ports and six internal 10-pin headers for RS-232 and two RS-422/485 connectors. CN7: COM 1/COM 2 Connector (DB9) PIN Description PIN Description DCD2 DCD1... - Page 21 CN5: COM 5~COM 8 Connector (2x20 Header) PIN Description PIN Description CN19: RS-422/485 Connector (3x2 Header) PIN Description PIN Description CN4/CN6: COM 3/COM 4 Power Pin Select Settings Options RI (default) Short 3-4 Short 3-4 Short 5-6 Short 5-6 +12V Short 1-2 Short 1-2...
-
Page 22: Ethernet Connector
*2: 4-wires point-to-point full duplex function 4-wires point-to-point full duplex RS-422/485 Typical RS-485 2-wires Mutildrop Network 3.11 Ethernet Connector The HS-1743 provides two external RJ-45 interface connectors. Please refer to the following for its pin information. CN14A/CN17A: RJ-45 Connector PIN Description... -
Page 23: Usb Connector
JP6: LAN 1 Enabled/Disabled Select Options Settings Disabled Short Enabled (default) Open 3.12 USB Connector The HS-1743 provides two 8-pin connectors, at location CN11/CN12, for four USB2.0 ports, and four external USB2.0 port at CN14B/CN17B. CN14B/CN17B: External USB2.0 Port Description Description USBD0-/USB2- USBD1-/USB3- USBD0+/USB2+ USBD1+/USB3+ CN11/CN12: Internal USB2.0 Ports... -
Page 24: Power And Fan Connectors
3.14 Power and Fan Connectors PW1: 20-pin ATX Power Connector PIN Description PIN Description +3.3V +3.3V +3.3V -12V PS_ON Power OK 5VSB +12V JP2/JP7: AT/ATX Power Function Select Settings Options ATX (default) Open Open Short Short FN1/FN2: Fan Power Connector Description +12V Fan In 1/Fan In 2... -
Page 25: Keyboard/Mouse Connectors
3.15 Keyboard/Mouse Connectors The HS-1743 offers two possibilities for keyboard/mouse connections. The connection is via CN1 for an internal 6-pin cable converter to a keyboard/mouse. CN1: Internal 6-pin KB/MS Connector Description Keyboard Data Mouse Data Keyboard Clock Mouse Clock CN2A: PS/2 6-pin Mini DIN Keyboard Connector... -
Page 26: System Front Panel Control
3.16 System Front Panel Control The HS-1743 has front panel control at location CN16 that indicates power-on, HDD and LAN action status. CN16: System Front Panel Control Description Description 330Ω pull VCC Speaker HDD LED ATX Power Button 330Ω pull VCC Reset Switch 330Ω... -
Page 27: Watchdog Timer
3.17 Watchdog Timer A user can set a value of Watchdog Timer in his software to reboot their hardware system. It is forced to reboot once user’s software fails to reset the Watchdog Timer before the counter of Watchdog Timer meets user’s setting value. -
Page 28: Audio Connectors
User can also use AL, 00H’s defined time for reset purposes, e.g.00H for Disable, 01H = 1sec, 02H=2sec….FFH=255sec. 3.18 Audio Connectors The HS-1743 has an onboard AC97 3D audio controller. CN20(Green) is for Line Out, CN20(Pink) is for MIC in. HS-1743 also support one extended speaker out with 2W amplifier. -
Page 29: Compactflash Socket
3.19 CompactFlash Socket The HS-1743 also offers a Type II CompactFlash socket via IDE interface located at the solder side of the board. The designated CN28 socket, once soldered with an adapter, can hold CompactFlash cards of various sizes. Please turn off the power before inserting the CF card. -
Page 30: Expansion Interface
JP1: CF Use Master/Slave Select Options Setting Master (default) Short Slave Open 3.20 Expansion Interface The HS-1743 offers one Type III mini PCI socket at CN24, one PCIe x1 socket at CN27, and one PCI socket at PCI1. -
Page 31: 8-Bit Gpio Function
3.21 8-bit GPIO Function The HS-1743 offers one 8-bit general purpose input/output port. CN21: 8-bit GPIO PIN Description PIN Description W83627EHG Digital I/O Assembly sample code ------------------------------------ Extended function mode ------------------------------------ MOV DX,2EH MOV AL,87H OUT DX,AL OUT DX,AL -------------------------------------... - Page 32 --------------------------------------- Configure input / output --------------------------------------- MOV DX,2EH MOV AL,F0H OUT DX,AL MOV DX,2FH MOV AL,FEH ; Setup GPIO bit0 as output, 0: output 1: input OUT DX,AL...
-
Page 33: Chapter 4 Ami Bios Setup
Chapter 4 AMI BIOS Setup The HS-1743 uses AMI BIOS for the system configuration. The AMI BIOS setup program is designed to provide the maximum flexibility in configuring the system by offering various options that could be selected for end-user requirements. This chapter is written to assist you in the proper usage of these features. -
Page 34: Using Setup
Using Setup In general, you use the arrow keys to highlight items, press <Enter> to select, and press <Esc> to quit. The following table provides more detail about how to navigate in the Setup program using the keyboard. Move to previous item ↑... -
Page 35: Main Menu
Main Menu Once you enter the AMI BIOS CMOS Setup Utility, the Main Menu will appear on the screen. The Main Menu allows you to select from several setup functions and two exit choices. Use the arrow keys to select among the items and press <Enter>... -
Page 36: Advanced Settings
Advanced Settings This section allows you to configure your system for the basic operation. You have the opportunity to select the system’s default speed, boot-up sequence, keyboard operation, shadowing and security. BIOS SETUP UTILITY Main Advanced PCIPnP Boot Security Chipset Exit Advanced Settings WARNING: Setting wrong values in below sections... - Page 37 BIOS SETUP UTILITY Main Advanced PCIPnP Boot Security Chipset Exit Configure advanced CPU settings Module Version –13.04 Manufacturer : Intel Intel(R) Core(TM) Solo CPU U1500 @1.33GHz Frequency : 1.33GHz FSB Speed : 533MHz Cache L1 : 32 KB Cache L2 : 2048 KB Ratio Actual Value : 10 Max CPUID Value Limit...
- Page 38 BIOS SETUP UTILITY Main Advanced PCIPnP Boot Security Chipset Exit Configure WIN627EHF Super IO Chipset Parallel Port Address [378] Parallel Port Mode [Normal] Parallel Port IRQ [IRQ7] Serial Port1 Address [3E8] Serial Port1 Mode [11] Serial Port2 Address [2E8] Serial Port2 Mode [10] Serial Port3 Address [2F0]...
- Page 39 BIOS SETUP UTILITY Main Advanced PCIPnP Boot Security Chipset Exit ACPI Settings ACPI Aware O/S [Yes] Advanced ACPI Configuration Select Screen Chipset ACPI Configuration Select Item Change Field Select Field General Help Save and Exit Exit v02.59 (C)Copyright 1985-2005, American Megatrends, Inc. BIOS SETUP UTILITY Main Advanced...
- Page 40 BIOS SETUP UTILITY Main Advanced PCIPnP Boot Security Chipset Exit APM Configuration Power Management/APM [Enabled] Video Power Down Mode [Disabled] Hard Disk Power Down Mode [Disabled] Suspend Time Out [Disabled] Throttle Slow Clock Ratio [50%] Keyboard & PS/2 Mouse [MONITOR] Power Button Mode [On/Off] Select Screen...
-
Page 41: Advanced Pci/Pnp Settings
Advanced PCI/PnP Settings This section describes configuring the PCI bus system. PCI, or Personal Computer Interconnect, is a system that allows I/O devices to operate at speeds nearing the speed the CPU itself uses when communicating with its own special components. This section covers some very technical items and it is strongly recommended that only experienced users should make any changes to the default settings. -
Page 42: Boot Settings
Boot Settings BIOS SETUP UTILITY Main Advanced PCIPnP Boot Security Chipset Exit Boot Settings Boot Settings Configuration Select Screen Boot Device Priority Select Item Hard Disk Drives Change Field USB Drives Select Field General Help Save and Exit Exit v02.59 (C)Copyright 1985-2005, American Megatrends, Inc. BIOS SETUP UTILITY Main Advanced... -
Page 43: Advanced Chipset Settings
Advanced Chipset Settings BIOS SETUP UTILITY Main Advanced PCIPnP Boot Security Chipset Exit Advanced Chipset Settings WARNING: Setting wrong values in below sections may cause system to malfunction. North Bridge Chipset Configuration South Bridge Chipset Configuration Select Screen Select Item Change Field Select Field General Help... -
Page 44: Exit Options
BIOS SETUP UTILITY Main Advanced PCIPnP Boot Security Chipset Exit Video Function Configuration DVMT Mode Select [DVMT Mode] DVMT/FIXED Memory [128MB] Select Screen Select Item Boot Display Device [CRT + DVI] Change Field Flat Panel Type [1024x768 18bit 2CH] Select Field General Help Save and Exit Exit... -
Page 45: Chapter 5 Software Utilities
Chapter 5 Software Utilities This chapter contains the detailed information of IDE, VGA, LAN and audio driver installation procedures. The utility disk that comes with the delivery package contains an auto-run program that invokes the installation programs for the IDE, VGA, LAN and audio drivers. The following sections describe the installation procedures of each driver based on WIN2K/XP operating systems. - Page 46 Once the Install Shield Wizard screen appears on the screen, make sure to close applications that are running and then click on Next> button. The Welcome screen is now displayed, and then click on Next> button to continue.
- Page 47 The License Agreement dialog box then appears on the screen. Choose Yes to proceed. When the Readme File Information dialog box pops up, just click on the Next > button to proceed.
-
Page 48: Vga Driver Installation
The Installation Utility successfully installed Plug and Play components onto the system. Click Finish to exit setup. VGA Driver Installation Insert the CD that comes with the board into the CD-ROM drive. Click VGA to install Intel® 945GME video driver. - Page 49 Once the InstallShield Wizard appears on the screen and click on the Next > button. InstallShield Wizard will extracting files to your hard drive, and then click on Next> to continue.
- Page 50 When the dialog box below appears, make sure you close all other Windows applications then click on the Next > button to proceed. The Intel® OEM Software License Agreement dialog box appears on the screen. Choose Yes to proceed.
-
Page 51: Audio Driver Installation
Once InstallShield Wizard finishes updating your system, it will prompt you to restart the computer. Tick on the Yes, I want to restart my computer now followed by a click on the Finish button to reboot. Only after your computer reboot and the new setting will be take effect. - Page 52 Once the Install Shield Wizard screen appears on the screen, make sure to close applications that are running. Realtek AC97 Audio Setup is preparing the Install Shield Wizard, which will guide you through the rest of the setup process. Click on Next> to process.
- Page 53 Realtek AC97 Audio is configuring your new software installation. After all installation finish, you will be prompted to start your system, click on the Finish button to reboot.
-
Page 54: Lan Driver Installation
LAN Driver Installation Insert the CD that comes with the board into the CD-ROM drive. Click LAN to install network driver. The License Agreement dialog box then appears on the screen, choose Next> to proceed. - Page 55 Click on the Advanced Network Services, and press Next> to proceed. Click Install to being the installation.
- Page 56 When the dialog box below appears, make sure you close all other Windows applications the click on the Finish button to proceed.
Need help?
Do you have a question about the HS-1743 and is the answer not in the manual?
Questions and answers