Table of Contents
Advertisement
3.5
Configuring the CPU
The HS-4705 offers the convenience in CPU installation with its
auto-detect feature. After installing a new microprocessor onboard, the
HS-4705 automatically identifies the frequency and clock speed of the
installed microprocessor chip, thereby eliminating the need for user to
do additional CPU configuration or hardware settings related to it.
JP3: Bus Clock Rate Select
Options
400MHz FSB (default)
533MHz FSB
3.6
System Memory
The HS-4705 provides one DDR socket at location DIMM1. The
maximum capacity of the onboard memory is 1GB.
3.7
VGA Controller
NOTE 1:
HS-4705 does not support DSTN/STN Panel.
NOTE 2:
HS-4705 does not support 640 x 480 TFT Panel.
NOTE 3:
There are specific panel cable and inverter for each different LCD.
If customers need other LCDs (different from TOSHIBA
LTM10C348F), please contact your sale representatives.
The onboard Intel 82845GME supports CRT display up to 1600 x 1200.
The HS-4705 provides two connection methods of CRT and LVDS
Panel device. CN11 offers a CRT connector, and CN12 offers 24-bit
single channel LVDS Panel connectors.
CN11: CRT Connector
PIN Description PIN Description
1
Red
3
Blue
5
GND
7
GND
9
VCC
11
N/C
13
HSYNC
15
DDCLK
10
Settings
Short 1-2
Open 1-2
2
Green
4
N/C
6
GND
8
GND
10
GND
12
DDDATA
14
VSYNC
1
2
5
1
10
6
15
11
Advertisement
Table of Contents
