Table of Contents
Advertisement
4.8
PCI / Plug and Play Setup
This section describes configuring the PCI bus system. PCI, or
Peripheral Components Interconnect, is a system that allows I/O
devices to operate at speeds nearing the speed the CPU itself uses
when communicating with its own special components. This section
covers some very technical items and it is strongly recommended that
only experienced users should make any changes to the default
settings.
Phoenix – AwardBIOS CMOS Setup Utility
Reset Configuration Data
Resources Controlled By
IRQ Resources
PCI/VGA Palette Snoop
Move Enter: Select + / - /PU/PD: Value F10: Save ESC: Quit F1: General Help
F5: Previous Values
F6: Fail-Safe Defaults
28
PnP/PCI Configurations
Disabled
Auto(ESCD)
Press Enter
Disabled
F7: Optimized Defaults
Item Help
Menu Level
Default is Disabled. Select
enabled to reset Extended
system Configuration Data
(ESCD) when you exit Setup
if you have installed a new add-on
and the system reconfiguration
has caused such a serious
conflict that the OS cannot boot
Advertisement
Table of Contents
