Appendix C: Factory Settings - Connect Tech JB0 User Manual

Chapter 4: Appendices – Factory Settings

Appendix C: Factory Settings

Function
Electrical Interface Jumper block JB is set for all ports RS-
Half Duplex
Termination
Note: Please see Figure 1 for the locations of these jumper
485/422 - all positions not jumpered
Jumper block JA is set for all ports
running in full duplex or multi-drop slave
mode - all positions not jumpered
Jumper blocks JC, JD, JE and JF are set
for all ports not terminated or biased - all
positions not jumpered
blocks.
Factory Setting
Titan/cPCI User's Manual, ver. 0.00
4-7