Download Print this page

Aircatglobal Virtualfly COMPOSS User Manual

COMPOSS

USER'S MANUAL

Rev. 2.2 - March 2022

1. IN THE BOX

A) COMPOSS

B) Allen Key

C) Replacement tags

D) Fine tip marker

For support, contact us at

support@virtual-fly.com

All trademarks and brand names are

trademarks or registered trademarks of their

C. Maria Aurèlia Capmany, 21

P.I. La Fàbrica – 08297 Castellgalí (Spain)

Phone: (+34) 938 333 301

https://www.virtual-fly.com

Table of Contents

Do you have a question about the Virtualfly COMPOSS and is the answer not in the manual?

Page 1 COMPOSS USER’S MANUAL Rev. 2.2 - March 2022 1. IN THE BOX A) COMPOSS B) Allen Key C) Replacement tags D) Fine tip marker For support, contact us at support@virtual-fly.com C. Maria Aurèlia Capmany, 21 © 2022 Virtual Fly, SL P.I.
Page 2 2. HARDWARE SETUP OPTION B: Mounting on non-magnetic surface 2.1 ATTACHING TO DESKTOP/HOME COCKPIT SETUP Two screws (not provided) or double sided tape (not OPTION A: Mounting on Iron Surface provided) are needed to secure to mount the COMPOSS in a non-magnetic surface. The COMPOSS has 4 magnets that make it very easy to attach to magnetic metal surfaces.
Page 3 2.2 CONNECTING TO PC BACKLIGHT Connect the integrated USB cable from the COMPOSS to the You can turn on/off the backlight of the COMPOSS as per computer where the flight simulation software is running. convenience by pressing the button (a) behind it, indicated in the diagram below.
Page 4 3. SOFTWARE SETUP If the COMPOSS does not point "North" after plugging The COMPOSS interacts with any computer through VFHub, the USB in, or displays a different position than the plane, the software developed by Virtual Fly to simplify setting up make sure to calibrate the device inside VFHub.