Panasonic WJ-ND200 Setup Instructions page 42

Network disk recorder
Hide thumbs Also See for WJ-ND200:
Table of Contents

Advertisement

About the SD memory recording
The SD memory recording is the function of some
Panasonic's cameras that saves images on the SD
memory card on the camera when communication with
the camera failed in the period set for the schedule
recording of this unit.
Applicable cameras/firmware versions
• WV-NP244 series: Ver.1.20 or later
• WV-NP1000 series: Ver.1.20 or later
• WV-NS202: Ver.1.00 or later
• WV-NF284: Ver1.00 or later
• WJ-NT304: Ver1.00 or later
• WV-NW484: Ver1.00 or later
For example, when "0.1 ips" is selected, the camera will
start the SD memory recording when no request for
image obtainment from the unit is made for 10 seconds
or more (equivalent to 0.1 ips*) in the time range of the
set schedule.
* The wait time to start the SD memory recording of the
camera differs depending on the set recording rate.
There are two ways to obtain recorded images from the
SD memory card; automatic obtainment by setting
schedules and manual obtainment by clicking the SD
memory data obtain button.
When time length between the set schedules is longer
than 30 minutes, images recorded by the SD memory
recording will be obtained automatically. All users will
forcibly be logged out when automatic obtainment
starts. To obtain SD memory data automatically, set
time length between the schedules longer than 30 min-
utes.
Refer to the operating instructions (PDF) for how to
obtain images manually.
42
Important:
• The emergency recording will be performed at the
recording rate set for "SD MEMORY REC" on the
"Emergency REC" page ( page 34) when commu-
nication with the camera failed during the emer-
gency recording.
• The SD memory recording will not be performed if
communication with the camera is not established
even when it reached the start time of the schedule
or when the emergency recording is triggered.
• Do not set the recording rate of the SD memory
recording for the same camera with multiple
recorders.
• Synchronize the clock of the recorder and the cam-
eras using the NTP function, etc. and set the
"Daylight saving (Summertime)" setting to "OFF".
When they are not synchronized and have different
time clocks, the SD memory recording may not
work.
• The recording time of SD memory data will be dis-
played based on the clock of the camera.
Notes:
• All images recorded on the SD memory card may
not always be obtained at a time depending on the
time length between the schedules or the total size
of the images. Images failed to obtain can be
obtained automatically next time.
• SD memory data cannot be obtained automatically
when the following is being performed:
• Playback
• HTTP download
• Emergency recording
• External recording
• SD memory data obtainment will be interrupted
when the following operation is performed:
• Login
• Emergency recording
• External recording
• Shifting to/from summertime (daylight savings)

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents