Safety Information - Haier Cube 83 5 Series User Manual

Safety information

Before switching on the appliance for the first time read the
Safety information
following safety hints!:
WARNING!
Before first use
Make sure there is no transport damage.
►
Remove all packaging and keep out of children's reach.
►
Wait at least two hours before installing the appliance in order to
►
ensure the refrigerant circuit is fully efficient.
Handle the appliance always with at least two persons because it is
►
heavy.
Installation
The appliance should be placed in a well-ventilated place. Ensure a
►
space of at least 10 cm above and around the appliance.
Never place the appliance in a damp area or location where it might be
►
splashed with water. Clean and dry water splashes and stains with a
soft clean cloth.
Do not install the appliance in direct sunlight or in the near of heat
►
sources (e.g. stoves, heaters).
Install and level the appliance in an area suitable for its size and use.
►
WARNING: Keep ventilation openings in the appliance or in the in-
►
built structure clear of obstruction.
Make sure that the electrical information on the rating plate agrees
►
with the power supply. If it does not, contact an electrician.
The appliance is operated by a 220-240 VAC/50 Hz power supply.
►
Abnormal voltage fluctuation may cause the appliance to fail to start,
or damage to the temperature control or compressor, or there may
be an abnormal noise when operating. In such case, an automatic
regulator shall be mounted.
Do not use multi-plug adapters and extension cables.
►
WARNING: Do not locate multiple portable socket-outlets or portable
►
power supplies at the rear of the appliance.
WARNING: When positioning the appliance, ensure the supply cord is
►
not trapped or damaged.
Do not step on the power cable.
►
Use a separate earthed socket for the power supply which is easy
►
accessible. The appliance must be earthed.
4
GB