Haier Cube 83 5 Series User Manual page 32

Care and cleaning
Notice: Water tank
If the water tank is not properly inserted, water can drip from the connection. Do not use
excessive force when removing or installing the water tank, to avoid damaging.
Replacing the LED-lamps
This product contains a light source of energy efficiency class G
compartment Voltage
DC 12V
Refrigerator
Non-use for a longer period
If the appliance is not used for an extended period of time, and you will not use only the
Holiday-function or the fridge off function for the refrigerator:
Take out the food.
►
Unplug the power cord.
►
Empty and clean the water tank
►
Clean the appliance as described above.
►
Keep the doors open to prevent the creation of bad odours inside.
►
30
Cleaning the water tank
1. Jake off the water tank out of the appliance
2. Remove the cover (A).
3. Unscrew the dispenser spout (B).
4. Clean the tank and dispenser spout with warm water and
liquid dishwashing detergent. Make sure all soap is rinsed off.
5. Mount the dispenser out (B) and take care that it is firmly
screwed to the water tank and the white O-ring (C) is in
position.
6. Close the cover (A) and replace the tank inside the appliance.
Replaceable (LED only) light source by a professional
max Power Energy efficiency class
5 W
Model
G HCW58F18EWMP
GB