Table of Contents
Advertisement
Operation Installation
Quiet Function Setting
In Auto/Cooling/Dehumidification/Fan/Heating mode,press"
the Turbo function,After that press"
function ,In this case ,the LED display "
off the function.
Notice:
●
When turn on Quiet function, the fan speed strip will not change.
●
Switch to other mode and adjust the fan speed will both exit the Quiet function
automatically.
●
Can not turn on "Turbo" and "Quiet" function at the same time.
In Auto/Cooling/Dehumidification
Fan/Heating m ode
Clean Reminder
When the wired controller received Clean Reminder, "
" to cancel the reminder
Master indoor unit setting
In on/off state of the unit，press"
display " F00"，press "
button，timer setting area blinking，adjust the value to "01"by pressing "
button，at last press "
DRY function setting
In Cooling/Dehumidification mode, press "
mode, press"
"or "
press "
" button to turn on/off this function.
"button at the same time for 3s to Quiet
"and "
" and "
" button for 5 seconds ，LED display "A01"，then press "
" button to make a confirm.
"button to switch the DRY function，"
".Then press "
中 间 显 示 区 域 漏 空
" bu tton switch to
Press "
the Quiet function
" icon blinking, press "
" buttons for 5 seconds，then LED
" button to access the function selection
9
"button for 3s to switch
"button to turn
" , "
"icon blinking，then
"
"
Advertisement
Table of Contents
