Table of Contents
Advertisement
Operation Instruction
Operation Installation
Notice:
In Auto mode, the setting temperature is un-adjustable.
Fan Speed Setting
Press "
" button, fan speed of indoor unit will change as the sequence below:
Notice:
●
After installation completed, wired controller will detect the unit type automatically.
Different types may have different ways of fan speed display, it can be divided into
the 2 kinds above.
●
In Dehumidification mode, the fan speed is default to low fan speed and can not be
adjusted.
●
When set the AUTO mode, the indoor fan speed will be changed according to the
indoor ambient temp., the fan speed strip is not displayed.
Swing Setting
In On-state,press"
" button to switch the swing function，"
to access the swing position selection， press"
swing position，press"
The swing function will be adjusted as below sequence:
No display
Auto
OFF
Position5
" button to access the function selection mode, press"
" button to turn on/off this function.
Position1
Position2
Position4
Position3
" icon blinking，then press"
" or "
" button to adjust the
6
" or "
" button
Advertisement
Table of Contents
