Powerware 9125 User Manual page 20

Installation
3. Place the UPS cabinet upside down so that the right end of the
4. Position two of the pedestals over the edge of each cabinet so
5. Carefully position the cabinets upright with the air vents at the
16
Powerware 9125 (2500–3000 VA) PowerPass
®
unit is accessible (see Figure 4).
Figure 4. Installing UPS Pedestals
that the weight of the unit is evenly distributed. Secure the
pedestals with the screws provided in the accessory kit.
top (see Figure 5 or Figure 6).
Air Vents
Figure 5. Pedestals with Two Cabinets
Distribution Module User's Guide
®
:
164201392 Rev B www.powerware.com