Timer - Panasonic SC-NS55 Operating Instructions Manual

Timer

Setting the clock Setting the clock
This is a 12-hour clock.
Press [CLOCK/TIMER] to select "CLOCK".
1
Each time you press the button:
CLOCK
Original display
2 Within 5 seconds, press [ /4] or [ /¢] to set
the time.
3 Press [CLOCK/TIMER] again to confirm.
Displaying the clock
Press [CLOCK/TIMER] to display the clock for few seconds.
Note
The clock may lose or gain minutes over a period of time. Readjust
as necessary.
Using the sleep timer Using the sleep timer
This function enables you to turn off the unit automatically
after the set time.
Press [SLEEP] repeatedly to select your desired time.
Sleep timer indicator
To cancel
Press [SLEEP] to select "OFF".
Changing the remaining time
Press [SLEEP] to show the remaining time, and press
[SLEEP] again to select your desired time.
Note
• The play and sleep timer can be used together.
• The sleep timer always has priority. Be sure not to overlap timer
settings.
˚ PLAY
Using the play timer Using the play timer
You can set the play timer to come on at a certain time to
wake you up.
Preparation
Turn the unit on and set the clock.
Prepare the music source you want to listen to; disc, radio,
option port or music port source, and set the volume.
Press [CLOCK/TIMER] repeatedly to select play
1
timer.
CLOCK
Original display
Within 5 seconds, press [ /4] or [ /¢] to set the
2
starting time.
Press [CLOCK/TIMER] to confirm.
3
4
Repeat steps 2 and 3 to set the finishing time.
To activate the timer
5 Press [˚PLAY] to turn on the timer.
"˚PLAY" is displayed.
6 Press [y] to turn off the unit.
The unit must be off for the timer to operate.
To Action
change the settings Repeat steps 1 to 4 and 6.
change the source
1) Press [
or volume indicator from the display.
2) Make changes to the source or volume.
3) Perform steps 5 and 6.
check the settings Press [CLOCK/TIMER] repeatedly to select
˚
(when the unit is on
PLAY.
or in standby mode)
cancel Press [˚PLAY] to clear the timer indicator
from the display.
Note
• The timer will start at the preset time, with the volume increasing
gradually to the preset level.
• The timer comes on at the set time every day if the timer is on.
• The unit must be in the standby mode for the timer to function.
• If you turn the unit off and on again while a timer is functioning, the
fi nish time setting will not be activated.
• Regardless of the channel selection during timer setting, the
XM satellite radio always comes on with the previous selected
channel.
• If MUSIC PORT or OPTION PORT is selected as the source when
the timer comes on, the system turns on and engages MUSIC
PORT or OPTION PORT as the source. If you wish to playback from
the portable audio equipment, activate the equipment's play mode
and increase the volume. (See the portable audio equipment's
instruction manual.)
˚ PLAY
Start time
Play timer indicator
Finish time
˚ ˚
PLAY] to clear the PLAY
13