Connecting The Backhaul Fiber Cable - Alcatel-Lucent 7310 Installation Manual

A -L 7310 M
LCATEL UCENT ETRO
Reinstall the external j-box cover and secure with the 2 security screws. Hand-tighten
7
screws.

Connecting the Backhaul Fiber Cable

Tools and Materials Required
Standard tools, including antistatic wrist strap and any tools to seal conduit

Compression fitting sized for fiber cable diameter or conduit if used (customer provided)

Cable ties for cable routing management

SAR-W gland (provided with the cabinet)

≡≡
To connect the backhaul fiber cable
Remove the desired knockout and install the compression fitting (customer-supplied) as
1
illustrated below.
Remove the nut and seal from the compression fitting and feed the fiber cable through the
2
nut, seal, and fitting, and into the cabinet. Re-secure the seal and nut to the compression
fitting. Do not tighten.
Swing down the SAR-W.
3
a
50
C C I
ELL ABINET NSTALLATION
1-in. compression fitting installed on cabinet
Open the cabinet door.
M
ANUAL
Nut