Motorola moto g8 POWER LITE User Manual page 127

Settings : Network and internet
2. Touch Mobile Hotspot settings > Advanced.
3. Adjust settings:
•
To limit number of allowed users, touch Maximum connections.
• To view and block users, touch Connected users.
• To remove blocks on users, touch Blocked users.
To disconnect all devices and prevent them from reconnecting:
1. Turn the hotspot off.
2. Change the password.
3. Turn the hotspot back on to continue using it.
Tip: When no devices are connected, the hotspot turns off automatically. To adjust this setting, go to
Settings > Network & internet > Hotspot & tethering > Wi-Fi hotspot > Advanced > Turn off hotspot
automatically.
Hotspot: View or change password
1. Go to Settings > Network & internet > Hotspot & tethering.
2. Touch Wi-Fi hotspot.
3. Touch Advanced > Hotspot password to see the current password.
4. To change the password, type over the current password.
Note: Although you can turn off passwords for your hotspot, keeping a password prevents unauthorized
usage of your cellular data.
USB tethering
To connect a device to the internet using your phone's cellular data and a USB cable:
1. Check that cellular data is
share.
2. Connect your phone to your computer with a USB cable.
3. On your phone, go to Settings.
4. Touch Network & internet > Hotspot & tethering.
5. Turn on USB tethering to start the connection.
You'll see in your notifications.
To stop the connection, touch the notification and turn off USB tethering, then disconnect your phone and
computer.
Bluetooth tethering
To connect a device to the internet using your phone's cellular data and a Bluetooth connection:
on. If cellular data is off, your phone doesn't have an internet connection to
119