CONCEALED SIDE MOUNT REMOTE CONTROL
Use this control for single outboard - single station installations.
*The NEUTRAL/RPM switch is an optional accessory.
NEUTRAL LED
This LED is located on the NEUTRAL/RPM switch and is used to provide information to the
operator. Regardless of the operating condition the LED will follow control lever NEUTRAL po-
sition, not actual gear position. Its brightness will not change when battery voltage fluctuates.
If the LED is flashing five times per second it indicates a critical fault.
4
NEUTRAL/RPM Switch*
Trim Switch Connector
N
Trim Switch
Shift and Throttle
Friction Screws